Weber Expert Series SJC-10XL 2-post lift including anchor and oil
Electro-hydraulic 2-post lift with a 4500 kg lifting capacity, drive-over plate, asymmetrical, double-telescoping lifting arms, automatic release of the safety latches, and a 400 V electrical connection. The package includes a set of heavy-duty anchors and 10 liters of hydraulic oil. The lift is partially pre-assembled, allowing for quick and easy setup.
- Fully automatic lifting and lowering at the touch of a button
- Double telescopic support arms for accommodating short to very long vehicles
- Door protection rubbers on both pillars
- Column cover in both lifting columns to protect against contamination
- Asymmetrical support arms for large door opening angles
- Support plate with rubber padding, height adjustable in two ways by turning.
- A set of support plate extensions (4 pieces, each 100 mm) is included in the scope of delivery.
- Low maintenance and wear, therefore low follow-up costs
- Easy handling thanks to 24-volt safety push-button control (dead man's control)
- Ideal loading area for cars and, due to its large passage width, also suitable for small vans.
- Automatic conical fine-toothed support arm locking mechanism, manual unlocking possible
- Upright lifting cylinders in both columns; the hydraulic cylinders are sealed within the cylinder tube, thus eliminating the risk of damage (contamination, grinding or welding spatter, etc.) to the piston rods.
- stable, very low corrugated sheet metal cover as drive-over protection between the columns
- Multiple safety devices, overload valve, pipe rupture protection and mechanical safety latches
- Hose routing in the column (already pre-assembled on the control column)
- Simple assembly, as many components (engine, shift box, hose on steering column, etc.) are already pre-assembled.
- Electromechanically operated safety latches
- Permissible load capacity 4500 kg, the structure of the lifting platform was successfully tested dynamically with a load of 115% of the permissible total weight and statically with 150% of the permissible total weight.
- Floor requirements according to current (in Germany permissible) structural analysis: concrete C20/25 DIN1045:2001-D7, double reinforced, with a minimum dimension of 4000 x 2000 x 200 mm.
Technical data |
|
| Load capacity | 4500 kg |
| Underswing height | 105 mm |
| Maximum lifting height. | 2060 mm |
| Column height | 2850 mm |
| Required ceiling height | 3150 mm |
| Column spacing | 2860 mm |
| Passage width | 2570 mm |
| Installation width | 3755 mm |
| Length of long support arm | 900–1830 mm |
| Length of short support arm | 620–1235 mm |
| Engine power | 2.2 kW |
| Electrical connection | 400 V / 3 Ph / 50 Hz |
| Lift time | approx. 50 sec. |
| Dead weight | 660 kg |
| Color column | anthracite – RAL 7016 |
| Color of support arms / drive-over plate | black – RAL 9017 |
| Drive-over plate height | 30 mm |
Possible application area
* The applications for our lifting platforms are highly diverse due to the wide variety of vehicle models and their lifting points. Therefore, please note that the application pictograms provided are for guidance only and do not reflect the actual lifting capacity of our products. Weber GmbH accepts no liability for the compatibility of all models within the respective vehicle class. Should you have any questions or uncertainties regarding the selection of a suitable product, we will be happy to advise you. .